Start with the mat’s two surfaces
The Percy and Vex Playmat is built around two working surfaces: a soft fabric top that gives your dice, miniatures, and cards a safe place to land, and a non-slip rubber backing that keeps the mat from sliding during play. That combination is what makes the mat useful at the table—and it also tells you how to treat it. The fabric needs gentle handling to protect the artwork, while the rubber backing needs to stay clean and flat to do its job.
At approximately 24 in. x 13.5 in., the mat lays flat and gives you a defined play zone without taking over the whole table. The same size also makes it a practical oversize mousepad for a home or office desk, so the care steps below apply whether the mat lives in your game bag or on your workspace.
How to set up the playmat for game night
A little setup care prevents most of the problems people run into with fabric-topped playmats: curling corners, slipping during rolls, and grit trapped under the rubber.
- Clear and dry the table: Wipe down the surface before you unroll the mat. A clean, dry table gives the non-slip rubber backing a fair chance to grip and keeps crumbs or grit from getting pressed into the fabric.
- Unroll and let it settle: The mat is designed to lay flat. If it has been rolled or folded in storage, give it a few minutes on the table before you start play so the edges relax.
- Place your play zone deliberately: Put dice, miniatures, and cards on the fabric top rather than hanging them over the edge. The soft top is the safe gameplay surface; the table beyond the mat is not.
- Check the backing before you roll: Run a hand under the mat to confirm the rubber backing sits flush against the table. If the mat slides, stop and clean the backing and table rather than weighting it down with books or dice.
What the Percy and Vex Playmat is made for
- Critical Role Pinups - Percy and Vex Playmat: Made with a soft fabric top and non-slip rubber backing, playmats provide a safe gameplay surface for your specialty dice, miniatures, and cards. The two materials need different care, and the fabric top is the reason you keep sharp or dirty items off the surface.

Critical Role Pinups - Percy and Vex Playmat - Critical Role Pinups - Percy and Vex Playmat: With dimensions of approximately 24 in. x 13.5 in., a playmat also makes an excellent oversize mousepad for home or office. If you use the mat at a desk, the same setup and cleaning habits apply—just watch for coffee cups and pen marks near the fabric.
- Critical Role Pinups - Percy and Vex Playmat: Features vibrant, full-color artwork of Percy and Vex by Babs Tarr. The printed surface is the collector-facing part of the mat, so cleaning choices should protect the artwork rather than scrub it.
How to clean a gaming playmat with a fabric top
The supplied product information does not include a manufacturer cleaning procedure, so treat the following as general fabric-care judgment rather than a brand instruction. Start dry: shake out loose crumbs and dust, then use a soft brush or a lint roller to lift debris from the fabric. For spots, dampen a cloth with plain water and blot gently—don’t soak the mat, and don’t scrub the printed artwork. Work from the edge of the spot inward so you don’t spread the mark. Let the mat air-dry completely before you roll it or put it back in a bag.
Avoid harsh cleaners, abrasive pads, and anything that leaves residue on the fabric; those can dull the full-color artwork or leave a sticky surface that attracts dirt. The rubber backing generally needs less attention—a wipe with a damp cloth is enough to remove dust that interferes with grip. If you’re unsure about a cleaner, test it on a small, less visible part of the backing first.
Playmat storage tips that protect the artwork and backing
Storage is where most playmats pick up permanent creases or surface wear. These habits keep the Percy and Vex mat ready for the next session.
- Roll, don’t fold: Folding concentrates pressure on the printed surface and can create creases that don’t relax. Roll the mat loosely with the fabric facing outward so the artwork isn’t pressed against itself.
- Keep the fabric side protected: If you store the mat in a bag, put it in alone or next to soft items. Loose dice, sharp-edged tokens, and metal miniatures can scuff the printed surface.
- Store it dry and flat: Never put away a damp mat. Moisture trapped against the rubber backing is a problem you can avoid by letting the mat air-dry fully first.
- Keep it out of direct sun and heat: Long exposure to sun or a hot car can stress both the printed fabric and the rubber backing. A cool, dry spot is the safer default.
Using the mat as an oversize mousepad
At roughly 24 in. x 13.5 in., the Percy and Vex Playmat doubles as a large desk surface, and the same care rules carry over. Keep drinks and snacks off the fabric, wipe up crumbs, and avoid dragging sharp desk items across the printed area. A mouse glides on the soft fabric top, but the mat’s primary job is still table play—so if you switch between desk and game table, check the backing for dust each time before you set it down.
Ordering limits to know before you buy
This playmat is made, fulfilled, and shipped by the licensing partner Ultra PRO International. Worldwide shipping is currently not available, and delivery is only available to physical shipping addresses within the United States. If you’re outside the U.S. or use a freight forwarder, plan around that restriction before you order. The mat is officially licensed Critical Role merchandise, and the Standard option is the only variant listed in the supplied information.


