Fjord Stone & Jester Lavorre Lapel Pins: How to Wear as a Pair
By Critical Role Store | Published: 2026-11-02
Category: How-to Guides
Learn how to wear the Fjord Stone and Jester Lavorre lapel pins as a coordinated pair, with placement tips for jackets, bags, and more.
Quick answer
Wear the Fjord Stone and Jester Lavorre lapel pins as a pair by placing them close together on the same garment panel, using the pin backs to keep them level, and choosing a fabric that can support two pins without sagging.
Why pair these two pins
Fjord and Jester share one of Critical Role's most beloved relationships, so wearing their pins together signals the duo rather than two unrelated characters. The pairing also balances visually: Fjord's cooler tones and Jester's brighter palette complement each other without competing.
If you already own one of the pins, adding the other completes the set and gives you a ready-made conversation starter for conventions or casual outings.
Choosing the right garment
Not every fabric handles two pins well. A denim or canvas jacket, a lanyard, or a sturdy tote bag distributes the weight and holds the pins upright. Thin knits, silk, and loosely woven fabrics can stretch or tear at the pin holes, especially when two pins sit close together.
If you want to wear them on a favorite but delicate garment, consider a pin clutch or a small fabric backing patch to reinforce the area before attaching the pins.
Steps to wear your Fjord and Jester pins as a pair
- Pick a sturdy spot: Choose a flat, reinforced area on your jacket, bag, or lanyard—such as a chest panel or pocket flap—where two pins can sit side by side without pulling the fabric. Test the fabric by gently tugging; if it stretches easily, add a backing patch or choose another item.
- Arrange the pins before attaching: Lay both pins on the garment to decide the order (Fjord left, Jester right, or vice versa) and the spacing—about a half-inch apart usually looks balanced. Check the arrangement in a mirror before pushing the pins through; repositioning leaves extra holes.
- Attach the first pin: Push the pin post through the fabric, then secure the back firmly. Avoid forcing the post through thick seams or multiple layers. If the post won't go through easily, the fabric is too thick—choose a thinner spot or use a pin clutch.
- Attach the second pin: Use the first pin as a visual anchor to keep the second level and evenly spaced. Secure the back the same way. Step back and check alignment from a distance; small adjustments are easier before the back is fully tightened.
- Secure and check: Gently press both pins to confirm they sit flat and the backs are snug. Give a light tug to each pin to ensure it won't slip off. If a pin feels loose, add a rubber pin back or a locking clasp for extra security.
Product facts
- Fjord Stone & Jester Lavorre Lapel Pins: Limited run made for the Critical Role Ties-the-Knot Pop-Up Shop in NYC (October 2025). Because this is a one-time run, plan your pairing carefully and avoid risky placement that could damage the pins.
Fjord Stone & Jester Lavorre Lapel Pins
